What a 2000mm Conveyor Belt Is
A 2000mm conveyor belt is a wide belting product with a nominal width of two meters, often described as a 2000mm wide conveyor belt or an extra-wide belt. It sits at the upper end of common belt widths, well beyond the 1200mm wide conveyor belt and 1800mm wide conveyor belt formats, and is chosen when a single stream must carry a large volume of bulk material without excessive belt speed. In practice, a 2000mm conveyor belt is a system component: its performance depends on the conveyor pulley, idler roller, and conveyor bracket arrangement around it, not on the belt alone.
Construction and Belt Types
The carcass and cover compound decide how a 2000mm conveyor belt behaves in a given plant. Common constructions include EP conveyor belt (also written EP rubber conveyor belt or EP fabric core conveyor belt), NN conveyor belt, and steel cord conveyor belt. Multi-ply fabric core designs are typical for wide belts, while steel cord tension members suit long, high-tension routes. Cover grades follow the duty: abrasion resistant conveyor belt for rock and ore, heat resistant conveyor belt near clinker or sinter, flame retardant conveyor belt and fire resistant conveyor belt for coal handling, oil resistant conveyor belt in workshops, and cold resistant or anti-static variants where conditions demand.
Typical Carcass and Cover Reference Data
- Width: B2000 nominal, matching the 2000mm conveyor belt designation
- EP strength grades seen in the market: EP200, EP400, EP630, EP1000, EP1250, EP1600, EP2000
- NN grades: NN100, NN200, NN300, NN400
- Steel cord grades: ST1000, ST1600, ST2000, ST2500
- Cover thickness examples: 4+2 mm, 6+2 mm, 8+3 mm; carcass commonly 2 to 6 plies
These values are reference ranges; final construction is set by the conveyor design and confirmed with the supplier.

Where Wide Belts Are Used
Two-meter belting appears in mining conveyor belt duties, quarry conveyor belt and aggregate conveyor belt lines, cement plant conveyor belt systems, power plant conveyor belt routes, steel plant conveyor belt yards, and port conveyor belt or ship loading conveyor belt applications. A crusher conveyor belt or stone crushing conveyor belt may use it to accept a broad, fast discharge. Underground coal mining conveyor belt installations may prefer flame retardant or PVG conveyor belt constructions, while iron ore conveyor belt and copper ore conveyor belt circuits lean toward high abrasion resistance.

| Industry | Typical Duty | Common Belt Focus |
|---|---|---|
| Mining and coal | Run-of-mine, coal transport | Flame retardant, abrasion resistant |
| Cement and power | Clinker, limestone, coal feed | Heat resistant, EP fabric core |
| Quarry and aggregate | Crushed stone, sand | High abrasion resistant, impact resistant |
| Port and bulk terminal | Ship loading, stockpile feed | High strength, steel cord |
Buyer Checklist for a 2000mm Belt
Start with the duty: tonnage, lump size, drop height, and material temperature. Confirm the tension class against the conveyor layout, then choose the cover grade. A wide belt carries more load per meter, so impact and edge damage deserve attention; skirted conveyor belt or corrugated sidewall conveyor belt designs may help contain material where spillage is a concern, and chevron conveyor belt patterns can assist on inclines. For comparison, a 1200mm conveyor belt or 1500mm wide conveyor belt may suit a narrower line, but it is not a substitute where the duty calls for a 2000mm conveyor belt.
Do not assume a fixed pulley diameter from belt width alone, and do not treat the drive pulley, tail pulley, and bend pulley as interchangeable. The pulley and idler roller sizes, shaft dimensions, and conveyor bracket spacing should come from the conveyor engineer. Ask for the belt’s splice method, whether endless conveyor belt supply is possible, and the recommended storage and handling plan. For more on matching belting with rollers and pulleys, see the technical notes at conveyorbeltingpro.com.
Maintenance Notes
- Check belt tracking and edge wear regularly on wide installations
- Inspect idler roller rotation to avoid localized cover wear
- Keep pulley lagging and conveyor bracket alignment in good order
- Repair small cover damage before it reaches the carcass
A 2000mm conveyor belt is a heavy-duty conveyor belt choice that rewards correct specification. Match the carcass, cover, and conveyor hardware to the actual material and route, and the belt will deliver stable, wide material flow across mining, cement, power, quarry, and port operations.







