Custom – Production – Design – Factory
WhatsApp: +86 17330216660

1200mm Wide Conveyor Belt for High-Capacity Material Handling

What a 1200mm Wide Conveyor Belt Is

A 1200mm wide conveyor belt is a heavy-duty bulk material conveyor belt built to a nominal 1200 mm (about 47 inches) belt width, a size commonly chosen for main haulage lines, transfer conveyors and plant feed belts where tonnage per hour is high. In mine, coal, cement, power plant and quarry circuits, this belt width sits between the 1000mm and 1400mm sizes and often serves as the backbone of a continuous handling system. Buyers may see it described as a B1200 conveyor belt or a 1200mm conveyor belt, which refers to the same product.

Width alone does not define the belt. A 1200mm Wide Conveyor Belt is a complete specification that also includes carcass type, ply count, tensile strength, cover grade and thickness. Two belts with the same 1200 mm width can behave very differently depending on those choices.

Construction and Carcass Options

The carcass carries the tension; the covers protect it. For a 1200mm belt, common constructions include multi-ply fabric cores such as EP (polyester-nylon) and NN (nylon-nylon), and steel cord designs for long, high-tension runs. Fabric core belts are often supplied as a Multi-Ply Fabric Core Conveyor Belt with two to six plies, while steel cord belts suit drives where stretch must stay low and splice strength must be high.

1200mm Wide Conveyor Belt

Typical strength grades for this width include EP200, EP400, EP630, EP1000 and up to EP1250 or higher, as well as ST1000, ST1600 and ST2000 steel cord classes. Cover rubber is usually specified as a top and bottom pair, for example 5+2 mm, 6+2 mm or 8+3 mm, with thicker covers for abrasive rock, ore and clinker. Surface forms range from plain to chevron, skirted, corrugated sidewall and pipe designs, each matched to slope, spillage control or routing needs.

Common Specifications at a Glance

Values below are typical reference ranges; final figures are set by the conveyor design and confirmed with the manufacturer.

1200mm Wide Conveyor Belt

  • Belt width: B1200 (1200 mm nominal)
  • Carcass types: EP fabric, NN fabric, steel cord, PVC/PVG for underground use
  • Strength classes: EP200 to EP1250 and above; ST1000 to ST2000 and above
  • Ply count: commonly 2 to 6 for fabric core
  • Cover thickness: 3+1.5, 4+2, 5+2, 6+2 or 8+3 mm
  • Cover grades: abrasion resistant, heat resistant, oil resistant, flame retardant, anti-static, cold resistant

For underground coal work, a PVG800S or PVG conveyor belt may be specified at this width because of its flame retardant and anti-static properties. For port and iron ore terminals, a high abrasion resistant or impact resistant cover is often the priority.

Where the 1200mm Width Fits

This width is widely used in crushing plants, aggregate yards, cement kiln feed lines, coal preparation plants, power station coal yards and ship loading systems. It handles lump ore, crushed stone, sand, clinker, coal and other bulk materials at high capacity without the transfer problems that narrower belts can face. Quarry and crusher discharge conveyors frequently use a 1200mm belt to keep up with primary crusher output.

1200mm Wide Conveyor Belt

The belt works with conveyor pulleys, idler rollers, frames and conveyor brackets sized to the 1200 mm width. Drive pulleys, tail pulleys and bend pulleys each have their own role and are not interchangeable; the belt width does not fix a single pulley diameter, so pulley sizing must follow the actual tension and shaft load calculations.

Selection and Maintenance Notes

When choosing a 1200mm Wide Conveyor Belt, start with the duty: tonnage, lump size, incline, ambient temperature and any fire or oil exposure. Match the carcass strength to the calculated tension, then pick a cover grade and thickness for the material. A heat resistant conveyor belt is needed near kilns and sinter lines, while a flame retardant belt is standard in coal mining and underground coal mining conveyors.

On the mechanical side, check pulley alignment, idler roller condition and skirt rubber clearance. A belt tracking poorly at 1200 mm width usually points to misalignment, uneven loading or a worn pulley lagging rather than a belt defect. Keep the belt tension within the design range, inspect splices regularly, and store spare belt rolls away from sunlight and moisture.

For more information on 1200mm conveyor belts, EP and steel cord options, and matching conveyor components, visit www.beltconveyorparts.com or www.conveyorbeltpro.com and review the technical data before ordering.