What a 1500mm Wide Conveyor Belt Is
A 1500mm Wide Conveyor Belt is a heavy-duty bulk material conveyor belt with a 1500 mm (about 59 inch) belt width. It sits in the wide-belt class, above common 1200mm and 1400mm belts and below 1600mm, 1800mm and 2000mm options. In plants handling high tonnage, this width lets one line carry more material without running the belt faster, which helps control dust, spillage and wear.
The keyword describes a width, not a carcass type. A 1500mm wide belt can be built as an EP Conveyor Belt, an NN Conveyor Belt, a Steel Cord Conveyor Belt, a PVC or PVG belt, or a special-purpose design. The width is the starting point; the construction is chosen for the duty.

How the Belt Is Built
Most 1500 mm belts use a fabric core or steel cord carcass with rubber covers. Fabric cores are usually 2 to 6 plies of EP or nylon fabric. Steel cord belts use parallel wires for very long runs and high tension. Cover compounds are selected for the cargo and climate.

- Top and bottom cover grades for abrasion, heat, oil, flame or cold resistance
- Cover thickness commonly 3+1.5, 4+2, 5+2, 6+2 or 8+3 mm, depending on impact and wear
- Edge construction for tracking and resistance to edge damage
- Optional Chevron Conveyor Belt profiles for inclined sections
- Skirted or Corrugated Sidewall Conveyor Belt designs where steep inclines need containment
Strength ratings for EP belts include EP200, EP315, EP400, EP500, EP630, EP800, EP1000, EP1250, EP1600 and EP2000. Steel cord grades such as ST1000 to ST3150 are also available. These are reference ranges, not a fixed match to 1500 mm width.
Structure and Support Equipment
A wide belt needs a properly designed conveyor frame. The belt rests on idler rollers arranged in troughing sets, returns on lower rollers, and runs around a head or drive pulley and a tail pulley. Bend pulleys and take-up pulleys handle tension and direction changes. Each pulley type has its own role and is not a substitute for another. Conveyor brackets tie the idlers and pulleys to the frame and keep alignment.
For a 1500mm Wide Conveyor Belt, trough angle, idler spacing and pulley face width should be checked against the belt width and load. A wider belt is more sensitive to off-centre loading, so chute design and skirt rubber matter. Belt training devices and adequate take-up travel help prevent edge rubbing.

Where It Is Used
This width appears in mining, coal preparation, cement plants, power plants, steel plants, quarries, sand and gravel yards, crushing circuits, ports and ship loading systems. Typical duties include ore, coal, clinker, limestone, aggregate and other bulk materials. In underground coal mining, flame retardant and anti-static grades are often specified. In cement and power plants, heat resistant or abrasion resistant covers may be required. For long overland runs, a Steel Cord Conveyor Belt or a high-strength EP belt may be preferred. For wet or oily cargo, an Oil Resistant Conveyor Belt or chemical resistant grade can be considered.

Specifications Buyers Should Confirm
| Item | Common Reference |
|---|---|
| Belt width | 1500 mm |
| Fabric carcass | EP or NN, 2 to 6 plies |
| EP strength grades | EP200 to EP2000 |
| Steel cord grades | ST1000 to ST3150 |
| Cover thickness | 3+1.5, 4+2, 5+2, 6+2, 8+3 mm |
| Special grades | Heat, oil, flame, cold, abrasion, anti-static |
| Edge options | Cut edge or moulded edge |
Do not assume a fixed pulley diameter or shaft size from belt width alone. Those values come from belt tension, pulley loading and the conveyor design. Ask the belt supplier and the conveyor designer to confirm compatibility.
Selection and Maintenance Notes
Match the belt to the material: sharp rock calls for impact and abrasion resistance, hot clinker calls for heat resistance, and coal service often calls for flame retardant and anti-static properties. Check splice type, since a wide belt needs a reliable vulcanized or mechanical joint. Keep idler rollers turning freely, inspect pulleys for build-up, and recheck tracking after loading changes. Store spare belt rolls flat and protected from sunlight and moisture.
For more information on conveyor belting, idlers and pulleys, visit the site and compare the 1500mm Wide Conveyor Belt options with your actual duty.







